LevelOne EAP-200 User Manual page 58

• WMM: The default is Disable. Wi-Fi Multimedia (WMM) is a Quality of Service (QoS) feature that
prioritizes wireless data packets based on four access categories: voice, video, best effort, and
background. Applications without WMM and applications that do not require QoS are assigned to the
best-effort category, which receives a lower priority than that of voice and video. Therefore, WMM
decides which data streams are more important and assigns them a higher traffic priority. This option
works with WMM-capable clients only.
<To receive the benefits of WMM QoS>
The application must support WMM.
▬
WMM shall be enabled on EAP-200.
▬
WMM shall be enabled in the wireless adapter on client's computer.
▬
•
IAPP: IAPP (Inter Access Point Protocol) is a protocol by which access points share information about
the stations that are connected to them. By enabling this function, the system will automatically
broadcast information of associated wireless stations to its peer access points. This will help wireless
stations roam smoothly among IAPP-enabled access points in the same wireless LAN.
•
Multicast/Broadcast Rate: Bandwidth configuration for multicast/broadcast packets. If your wireless
clients require larger or smaller bandwidth for sending multicast/ broadcast packets, the administrator
can customize the EAP700's multicast/ broadcast bandwidth here.
58