Table of Contents
Advertisement
The EAP-200 provides a web firmware upload / upgrade feature. The administrator can download the
latest firmware from the website and save it on the administrator's PC. To upgrade the system firmware,
click Browse to choose the new firmware file you downloaded onto your PC and then click Upload to
execute the process. There will be a prompt confirmation message appearing to notify the administrator to
restart the system after a successful firmware upgrade. Please restart the system after upgrading the
firmware.
•
It is recommended to check the firmware version number before proceeding further.
Please make sure you have the correct firmware file.
•
Firmware upgrade may sometimes result in the loss of some data. Please ensure that all
Note:
necessary settings are written down before upgrading the firmware.
•
During firmware upgrade, please do not turn off the power. This may permanently
damage the system.
System Upgrade Page
73
Advertisement
Table of Contents
