Auto Shut-Off System; After Ironing - Oliso Smartiron User Manual

auto shut-off system

If the Oliso® Smart Iron™ is not
being used while it is plugged in,
the status light will flash red and
the iron will turn itself off.
Simply touch the handle of the
iron to restart it.

after ironing

e.
iron Position
horizontal,
Lifted
iTouch™
vertical
on
Knocked over
horizontal,
iTouch™
(scorch guards
oFF
will pop out as a
safety feature)
. Turn the fabric selector to off. Slide the steam selector to off (
a
Unplug the appliance. (Do not hold iron while unplugging or the
b.
scorch guards will not stay extended. Iron should always be stored with
scorch guards extended to prevent leaking).
Allow to cool throughly before storing.
c.
Important: Empty water from the water tank after each use. To do this,
d.
open the flip funnel™ and tilt the iron to the left over a water receptacle
until the tank is empty.
For easy storage, the power cord can be wound loosely around the iron
e.
once it has cooled.
TG1050 TG1100
8 minutes 8 minutes
8 minutes
8 minutes
30 seconds
30 seconds
30 seconds
30 seconds
TG1250 TG1600 Pro
8 minutes 30 minutes
8 minutes 30 minutes
30 seconds 30 seconds
30 seconds 3 minutes
).
5