Auto Shut-Off System - Oliso Touch & Glide Instruction Manual

auto shut-off system

If the Touch&Glide iron is not being used while it is plugged in, the status light will flash red and the iron will
TM
turn itself off. The auto shut-off timing depends on whether the Auto-Lift
will return to normal operation once you resume ironing.
Auto-Lift
iron position
30 seconds knocked over
TM
*when the Auto-Lift system is off and the iron is left unused in a horizontal position for more than 30 seconds,
the spacers will raise the iron to prevent burning your fabric or ironing surface.
TM
on ( )
auto shut-off timing
8 minutes unused
8 minutes vertical
TM system is turned on or off. The iron
TM
Auto-Lift off (
iron position auto shut-off timing
30 seconds after,
spacers lift iron*
8 minutes vertical
30 seconds knocked over
)