Advertisement
Advertisement
Related Manuals for Oliso smartiron TG1050
Summary of Contents for Oliso smartiron TG1050
- Page 1 user manual smartiron ® for models TG1050 TG1100 TG1250Pro TG1600Pro...
- Page 2 When placing the iron on its stand, ensure that the surface on which the stand is placed is stable. special instructions oliso® irons are high wattage appliances - For EU version is 2000-2400W at 220-240V. For US or Canada version is 1600W at 120V for models TG1050 or 1800W at 125V for models TG1100, TG1250Pro or TG1600Pro.
-
Page 3: Table Of Contents
9 10 itouch ® get to know your oliso smart iron ® ® flip funnel steam burst 360° pivot cord spray nozzle ™ detailer tip water tank spray mist itouch ® over-ride all features available... - Page 4 3 simple steps to start step 1 step 2 step 3 fill unplugged set up iron Open the flip funnel Plug in. When the green light ™ and add water to the Choose a stops blinking and is solid, tank with the fill cup or fabric setting the iron is ready for use.
-
Page 5: Soleplate
itouch + auto-lift ® ® activating itouch deactivating itouch ® ® itouch itouch touch ® release ® touch activated handle itouch ™ If you wish to deactivate the itouch auto-lift itouch® feature, set the switch ® ® on the back of the iron to the your gentle touch (OFF) position. -
Page 6: Scorch Guards
. If the oliso® smart iron® is not being used while it is plugged in, the status light will flash red and the iron will turn itself o . -
Page 7: Water Tank
filling water tank step 1 step 2 step 3 switch o unplug iron open port fill (cup included) Two fill cups equal the max capacity of the water tank. If you need to add water during ironing, unplug the iron and repeat the above steps. - Page 8 flashing green solid green flashing red optimizing auto o heat o ready temperature (heat) The oliso® smart iron® uses a status light to display the iron’s status. To ensure correct temperature, wait until the light displays solid green before ironing.
-
Page 9: Fabric Selector
To turn o the steam, slide the steam selector o ( The oliso® smart iron® has a zero-drip feature which shuts o steam any time the iron’s no drip scorch guards™ are extended. system... -
Page 10: Steam Selector
To ensure optimal steam production, the steam valve should be regularly cleared of accumulated debris and minerals. This is done by moving the steam selector back and forth from the o ( ) to the max ( ) steam settings several times. If problems persist please visit oliso.com/faqs... - Page 11 The liability of oliso is limited solely to the cost of repair or replacement of the product at its option. This warranty does not cover normal wear of parts and does not apply to any product that has been tampered with or used for commercial purposes. This warranty does not cover damage caused by misuse, abuse, use on improper voltage or current, use contrary to the operating instructions, negligent handling or damage due to faulty packaging or mishandling in transit.
- Page 12 © 2018 Unovo LLC dba OLISO All rights reserved. oliso® logo, smart iron®, itouch®, and auto-lift® are registered trademarks of Unovo LLC dba OLISO. U.S. Patent No. #6,453,587 B1, #6,925,738 B2, #7,406,783 B2 & # 7,546,701 B2. EU Patent No. #EP1404915B1 & Patents Pending.
Need help?
Do you have a question about the smartiron TG1050 and is the answer not in the manual?
Questions and answers