Auto Shut-Off System; After Ironing - Oliso Smart Iron TG1250 User Manual

Auto Shut-off System

If the Oliso® Smart Iron™ is not
being used while it is plugged in,
the status light will flash red and
the iron will turn itself off.
Simply touch the handle of the
iron to restart it.

After Ironing

4
iTouch™
ON
iTouch™
OFF
. Turn the fabric selector to off. Slide the steam selector to off (
a
Unplug the appliance. (Do not hold iron while unplugging or the
b.
scorch guards will not stay extended. Iron should always be stored with
scorch guards extended to prevent leaking).
Allow to cool throughly before storing.
c.
Important: Empty water from the water tank after each use. To do this,
d.
open the flip funnel™ and tilt the iron to the left over a water receptacle
e.
until the tank is empty.
For easy storage, the power cord can be wound loosely around the iron
e.
once it has cooled.
Iron Position TG1050
Horizontal, 8 minutes
Lifted
Vertical 8 minutes
Knocked Over 30 seconds
Horizontal 30 seconds
(scorch guards
will pop out as a
safety feature)
TG1100 TG1250
8 minutes 8 minutes
8 minutes 8 minutes
30 seconds 30 seconds
30 seconds 30 seconds
TG1600 PRO
30 minutes
30 minutes
30 seconds
3 minutes
).