Advertisement
Quick Links
changing cord exit position
M3PRO
project iron
important safety instructions
1
Before beginning conversion make sure the iron is cold and unplugged from the outlet, and empty of water.
Only use the original parts of the iron to reassemble, do not substitute or modify the parts in any way, or add
2
additional parts or material to the iron.
Be careful to not damage the power cord with the tools. If damage occurs stop and contact oliso customer service.
3
Be careful not to overly twist the cord when moving.
4
Ensure cord is fully under retainer before closing the cover.
5
Be careful when fastening the cover in place not to trap the cord between the retainer as it could damage
6
the cord.
If the cover does not fit snugly back in place, remove and check cord is in the right place.
7
Reassemble the cover completely and secure the screws before plugging the iron into the outlet again.
8
9
We recommend changing the cord exit position only once.
if cord is damaged or cover does not close properly, stop and contact customer service
™
read all instructions before starting
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Oliso project iron M3PRO
Summary of Contents for Oliso project iron M3PRO
- Page 1 Only use the original parts of the iron to reassemble, do not substitute or modify the parts in any way, or add additional parts or material to the iron. Be careful to not damage the power cord with the tools. If damage occurs stop and contact oliso customer service. Be careful not to overly twist the cord when moving.
- Page 2 changing cord exit position what you will need #1 Phillips head handheld Stable surface and a soft cloth A tool with a soft durable point screwdriver. Do not use a or towel to protect the surface (like a pencil or tweezers). powered screwdriver.
- Page 3 If at any time during the conversion the cable becomes damaged or trapped, or you are unable to easily reclose the cover do not use the iron and contact oliso consumer service who will help you resolve the issue.
Need help?
Do you have a question about the project iron M3PRO and is the answer not in the manual?
Questions and answers
do I have to use an adapter plug with this iron
The Oliso Project Iron M3PRO is dual voltage (110/120V and 220/240V) and automatically adjusts to the correct voltage. However, a plug adapter is required if the plug type does not match the outlet.
This answer is automatically generated