Simple Steps To Start - Oliso Smartiron User Manual

3 simple steps To start

1
2
3
2
FiLL UnPLUGGeD
Open the Flip Funnel™
and add water to the
tank with the fill cup or
directly from a faucet.
Note: 2 fill cups equal the max
capacity of the water tank.
seT UP
Plug in, then
choose a fabric
and steam
settings.
iron
When the green
light stops blinking
and is solid, the iron
is ready for use.
Touch the handle
and begin using.
iTouch™ Technology
DeacTivaTinG The iToUch™ TechnoLoGy
OFF ON
If you wish to deactivate the iTouch™ feature,
set the switch on the back of the iron to the
OFF position. The iron will function like a
standard iron. If you wish to reactivate the
iTouch™ feature, set the switch back to the
ON position.
As a safety precaution, when iTouch™ is
deactivated, if the soleplate is left face
down for more than 30 seconds, the scorch
guards will automatically lift the iron off
fabric, preventing scorching and burns. For
more information regarding the auto shut-off
safety feature, see page 5.
To operate, place the
iron, soleplate down, on a
flat surface. Plug the iron
into an outlet and make
sure the iTouch™ switch
is in the ON position.
Simply touch the iron
handle, and the iron will
sense your hand and
lower. Let it go, and the
iron's scorch guards will
automatically raise the iron
above the fabric.