Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Dakota Alert Manuals
  4. Transmitter
  5. WMT-3000
  6. Owner's manual

Dakota Alert WMT-3000 Owner's Manual

Wireless transmitter
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Dakota Alert
™
WMT-3000
Wireless
Transmitter
Owner's Manual

Advertisement

loading

Related Manuals for Dakota Alert WMT-3000

Summary of Contents for Dakota Alert WMT-3000

  • Page 1 Dakota Alert ™ WMT-3000 Wireless Transmitter Owner’s Manual...
  • Page 2 Installation: The WMT-3000 transmitter is used with the Dakota Alert WR-3000 receiver. The WMT-3000 trans- mitter uses a passive infrared (PIR) detector to detect people, vehicles or large animals at the monitored location.
  • Page 3 PIR and the plastic backing. You will now be looking inside of the case at the radio transmitter (figure 2) 2. Locate the dip switches in the WMT-3000 Figure 1 transmitter module (figure 2).
  • Page 4 3. The first eight dip switches are for the frequency setting (256 combinations). Set switches 1-8 (3) to match the eight switches in the receiver. 4. Switches 9 and 10 (4) are for the zone/ channel setting on the transmitter. The four zones are as follows: Switch Switch...
  • Page 5 Mounting the transmitter: 1. Select a location to mount the transmit- ter, such as a post or tree. 2. For best results, the transmitter should be about three to four feet off the ground, and about twenty feet from the side of the drive. 3.
  • Page 6 Coding the receiver: 1. Open the receiver case by inserting a small screwdriver into one of the pry notches on the side of the case. (refer to receiver manual) 2. Gently lift off the front cover. 3. Locate the eight dip switches on the receiver and make sure they are set identically to dip switches 1-8 on the transmitter.

  • Page 7: Technical Support

    Troubleshooting the WMT-3000 Although the WMT-3000 should be very reliable, there are occasions when you might have false alarms or a failure to alert. If you are getting false alarms, please try this: • Set filter jumper to “ON”. • Decrease sensitivity jumper.

  • Page 8: Warranty

    WARRANTY Dakota Alert warrants this product to be free of defects in material and workmanship for a period of one year from the date of purchase. This warranty does not cover damage resulting from ac- cident, abuse, act of God or improper operation.