Grizzly G0621X Owner's Manual page 31

Resawing
Figure 34
Page 42
Figure 34.
When resawing thin pieces, a wandering
blade (blade lead) can tear through the side
of the workpiece, exposing your hands to
the blade teeth. Always use push blocks
when resawing and keep your hands clear
of the blade.
To resaw a workpiece:
1.
2.
Note: The blade must also be sharp
and clean.
3.
NOTICE
The scale on the front rail will NOT be accu-
rate when using the resaw fence.
4.
5.
6.
ON
Figure 34