Lap Belt Instructions - Sunrise Medical Quickie GP Range Owner's Manual

Lap belt instructions

Before using your wheelchair
ensure the seat belt is worn and
correctly adjusted before use.
The lap belt is fitted to the wheelchair
as shown in the illustrations. The lap
belt is fitted to the rear frame with the
tri glide supplied. The belt should then
be run around the backrest post and
backrest bracket.
It is important that the belt
is routed around the back of
the wheelchair. The buckle end
can be fed between the side
guard and the back post
Adjust the belt position so that the
buckles are in the centre of the seat.
Issue 6
Adjust the lap belt to suit the
user's needs as follows:
To increase the belt length
Feed the belt through slide
adjusters and male buckle to
provide more belt length
To reduce the belt length:
Feed the belt back through male
buckle and slide adjusters
Ensure the belt is not looped at the
male buckle
35 GP Range