Samsung SND-3080P User Manual page 68

setup screen
To set a motion area
You can set a specific area to detect a motion in.
1. From the Motion Detection setup
window, click [Setup] in the <Motion
area>.
The Motion Area window appears.
You can set a specifi c area to detect a
motion in.
2. Click over square boxes corresponding
to the target motion area.
The selected area will be highlighted
yellow.
3. To cancel the selection, click the square box again.
The square box will restore its original color.
4. When done, click [Apply].
Your settings will be saved.
The Motion Detection function will operate on the selected area.
To set the scheduled transfer
You can set to transfer the JPEG image to the FTP/SMTP server saved in the SD memory
card at a specific interval.
1. Select <Event> - <Schedule>.
The Schedule Transfer setup window
appears.
Schedule transfer function :
If selecting <Enable>, the schedule
transfer function will be activated;
if selecting <Disable>, it will be
deactivated.
Transfer interval : You can set the
time interval to transfer images.
You can set the unit of the interval to <seconds> or <minutes>; you can also set to
transfer one image per 5/15/30/45/60 seconds, or one per 5/15/30/45/60 minutes.
Activation time : You can set a time to execute a specific command when a sched-
ule transfer event occurs.
- Always : Always sends an image at the set interval.
- Only scheduled time : Sends the image only on a specifi ed weekday, or time.
2. When done, click [Apply].
Your settings will be saved.
68_ setup screen