Default Setup - Samsung SND-3080P User Manual

DEFAULT SETUP

To configure the video settings
You can set the video resolution and quality, and select the codec required.
1. Select <Basic> - <Video>.
The Video setup screen appears.
Brightness : Adjust the screen
brightness from 1 to 100.
Contrast : Adjust the contrast from
1 to 100.
Resolution : Set the video size of the
MPEG4, H.264, and MPEG fi les.
- NTSC : 4CIF(704x480),
VGA(640X480), CIF(352X240)
- PAL : 4CIF(704x576),
VGA(640X480), CIF(352X288)
Quality : Adjust the picture quality
from 1 to 10.
Frame rate :
- NTSC : Select one from 30 fps, 15
fps, 8 fps, 3 fps, and 1 fps.
- PAL : Select one from 25 fps,
13fps, 6fps, 3fps and 1fps.
Bitrate control* : Select CBR
(Constant Bit Rate) or VBR (Variable
Bit Rate) for the compression
method.

If selecting VBR, you can not set the target bit rate.
Target bitrate : Transfers video signal at a specifi ed bit rate.
Compression : Adjust the compression rate from 5 through 100 by 5.
Encode priority : Set the video transfer method to Frame rate or Quality.
GOP* size : Select a GOP size between 5 and 15.
Deblock : This will soften the edges between macro blocks.
De-interlace : You can set the grid noise reduction function.

This can be set only if the resolution of MPEG4 video is 4CIF.
English _53