Samsung SND-3080P User Manual page 22

installation & connection
4. Use the provided screws (x3) to fi x the
bracket to a desired position (ceiling or wall).

Ensure that the <CAMERA FRONT> label on the
bracket faces the direction for camera monitoring.
5. Arrange the cables through the bracket to the ceiling or wall.
If you drill a hole in the ceiling cover for wiring, press hard to remove the cover and
attach the dust-proof plate to it, and arrange the cables through the plate. If you
intend to arrange the cables without drilling a hole, use the empty area opposite to
the <CAMERA FRONT> label side for the wiring purpose.
6. Mount the main unit onto the bracket.
Align the marking hole of the main unit with the <CAMERA FRONT> label of the
bracket, and turn the unit in the <LOCK> direction.
7. Adjust the lens in a desired direction.
For adjusting the lens direction, refer to "Adjusting the monitoring direction for
the camera".
8. Secure the inner cover to the main unit.
Fit the two holes of the wing-side locks on the inner cover into the corresponding
hole of the main unit, and press it down until you hear a click.
9. Fix the cover to the main unit.
Fit the protruding part inside the cover into the corresponding hole of the main unit,
and turn the cover to fi x it.
22_ installation & connection
Wiring Cover