Chapter 9. Settings For The Entire Td-12 [Setup]; Midi Settings And Operations [F1 (Midi)]; Setting The Midi Channels For Each Part [F1 (Midi Ch)]; Midi Settings For The Entire Td-12 [F2 (Global)] - Roland TD-12 Owner's Manual

Percussion sound module v-drums
Hide thumbs Also See for TD-12:
Table of Contents

Advertisement

Chapter 9. Settings for the Entire TD-12 [SETUP]

SETUP screen
fig.09-Setup_70
MIDI Settings and Operations
[F1 (MIDI)]
Setting the MIDI Channels for Each
Part [F1 (MIDI CH)]
For each part, you can specify the channel on which the TD-12
will receive and transmit MIDI messages.
1. Press [SETUP].
[SETUP] lights, and the "SETUP" screen appears.
2. Press [F1 (MIDI)] - [F1 (MIDI CH)].
The "MIDI CHANNEL" screen appears.
fig.09-MidiCh_70
3. Press [CURSOR (up/down)] to select the part
you wish to set.
4. Press [CURSOR (left/right)] to select the
parameter.
5. Use [+/-] or [VALUE] to make settings.
Parameter
Value
Tx/Rx
OFF, ON
Channel
CH1–CH16
* Drum kit part and percussion part can be overlaid and set to
"CH10." When a duplicate note number is received, the
instrument assigned to the drum kit part (the pad instrument)
sounds. Other note number is received, the percussion part
instrument is played.
* Other parts and MIDI channels cannot be overlaid.
MIDI Settings for the Entire TD-12
[F2 (GLOBAL)]
1. Press [SETUP].
[SETUP] lights, and the "SETUP" screen appears.
72
Description
Turns the transmitting and
receiving MIDI messages
ON or OFF.
transmit and receive channel
2. Press [F1 (MIDI)] - [F2 (GLOBAL)].
The "MIDI GLOBAL" screen appears.
fig.09-MidiGlobal_70
3. Press [CURSOR (up/down)] to select the
parameter.
4. Use [+/-] or [VALUE] to make settings.
Parameter
Soft Thru
Local Control
Device ID
V-LINK MIDI Ch
V-LINK Device ID
Soft Thru
This section explains how you can use the Roland SPD-20 (a
MIDI controller) together with the TD-12's pads to play
internal sounds and an external sound module.
When Soft Thru is set to "ON," the messages received at MIDI
IN will also be transmitted from the MIDI OUT/THRU
connector.
fig.SoftThru.e
Pad or Pedal
TRIGGER
INPUT
MIDI IN
TD-12
Value
OFF, ON
OFF, ON (DRUM), ON (PERC)
1–32
CH1–CH16
1–32, 128
SPD-20
MIDI OUT
To the MIDI IN of another
sound module or sampler
MIDI
OUT/THRU

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents