Multi-Effects Parameters - Roland TD-12 Owner's Manual

Multi-Effects Parameters

DELAY
Adds the delay sound.
Parameter Value
Time 0–1600 (ms)
Feedback -98–98 (%)
PANNING DELAY
This is a delay effect with echoes that pan left and right.
Parameter Value
TimeL 0–1600 (ms)
TimeR
Level L 0–127
Level R
Feedback -98–98 (%)
FLANGER
Produces a metallic resonance that rises and falls somewhat
like a jet airplane taking off or landing.
Parameter Value
Delay 0–15.0 (ms)
LFO Rate 1–128
Depth 0–127
Feedback -98–98 (%)
Phase 0–180
Description
Time until the delay
sound is heard
Amount of the delay
sound that is fed back
into the effect (minus:
inverts the phase)
Description
Time until the delay
sound is heard
Volume level of the de-
lay sound
Amount of the delay
sound that is fed back
into the effect (minus:
inverts the phase)
Description
Tone of the flanger
Frequency of modulation
Depth of modulation
Amount of the flanger
sound that is fed back into
the effect (minus: inverts
the phase)
Spatial spread of the
sound
PHASER
Adds a phase-shifted sound to the original sound, producing
a swirling modulation.
Parameter Value
Freq 100–8000 (Hz)
LFO Rate 1–128
Depth 0–127
Resonance 0–127
CHORUS
Gives richness and spaciousness to the sound.
Parameter Value
Delay 8.0–30.0 (ms)
LFO Rate 1–128
Depth 0–127
Phase 0–180
Chapter 4. Effect Settings
Description
Basic frequency at which
the sound will be modu-
lated
Frequency of modulation
Depth of modulation
Amount of feedback
Description
Tone of the chorus
Frequency of modulation
Depth of modulation
Spatial spread of the
sound
43