Connect The Scsi Cable - HP C6388B User Manual

C. Insert the corner of the disk unit into the rear of the stand, then swing the
unit down to lock it into the stand.
Figure 2-6 Inserting the Drive into the Stand

7. Connect the SCSI Cable

You can connect the disk drive directly to your system or to another external
SCSI device that is connected to your system. To connect the disk drive to
another external device, see the information about connecting multiple storage
devices in your system owner's guide.
CAUTION
You must power down your system before connecting the SCSI cable.
To connect the disk drive to your system, connect the SCSI cable to either
SCSI connector on the disk drive unit and to the SCSI connector on the
system. Connect the SCSI terminator to the unused SCSI connector on the
disk unit.
2-6 Disk Installation