Figure 2-3. View Of Installed Scsi Cable And Terminator - HP 5243-2SE Installation And User Manual

Installing and Configuring the Tape Drive for the
NonStop S-Series Server
d. Place a terminator on the bottom left SCSI port of the tape drive. See
Figure 2-2

Figure 2-3. View of Installed SCSI Cable and Terminator

SCSI Cable
e. Connect the DC power cord to the top power connector. For the location, see
Figure 2-2
two tape drives.
5243-2SE Tape Drive Installation and User's Guide —542757-003
and Figure 2-3.
Terminator
on page 2-2. There are independent DC power ports for each of the
2 -3
Installation