Belt Tilt
The sanding belt rotates 360˚ to best meet the
needs of your sanding operation.
To adjust the sanding belt tilt:
1. Disconnect the machine from the power
source!
2. Loosen the belt tilt lock lever (see Figure 8.)
Figure 8. Belt tilt lock lever.
3. Rotate the sanding belt to the desired angle.
4. Tighten the belt tilt lock lever.
G0565 Adjustable Sponge Sander
The dust hoods easily tilt to funnel the maximum
amount of dust into the dust collection system.
Tools Needed:
Wrenches 19mm ............................................... 2
To adjust the sanding belt tilt:
1. Disconnect the machine from the power
2. Hold the exterior hex nut with a wrench and
Belt Tilt
Lock Lever
3. Rotate the dust hood to the desired angle.
4. Hold the exterior hex nut with a wrench and
Dust Hoods
source!
loosen the interior hex nut (see Figure 9).
Figure 9. Dust hood lock nuts.
tighten the interior hex nut.
Qty
-15-