Grizzly G0538 Owner's Manual page 20

Burn marks on 1. Using too fine of sanding grit.
workpiece.
2. Using too much pressure.
3. Work held still for too long.
Glazed sanding 1. Sanding wet stock.
surfaces.
2. Sanding stock with high residue.
Workpiece fre- 1. Sanding in direction of spindle rotation
quently gets pulled (left-to-right).
out of your hand. 2. Starting the workpiece on a leading cor-
ner.
-18-
1. Use a coarser grit sanding sleeve.
2. Reduce pressure on workpiece while sanding.
3. Do not keep workpiece in one place for too long.
1. Dry stock properly before sanding.
2. Use different stock. Or, accept the characteristics of
the stock and plan on cleaning⁄replacing belts⁄discs fre-
quently.
1. Move workpiece against direction of spindle rotation
(right-to-left).
2. Start workpiece on a trailing corner.
G0538 Oscillating Spindle Sander