Table of Contents
Advertisement
Chapter 3
Instant-Off
Delay 4 Sec
State After Power Failure
This item specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
Off
On
Auto
LED In Suspend
This item sets how the system uses Power LED on the case to indicate the
suspend state. Settings are:
Single
Dual
Blink
Wake Up Events
Press <Enter> to enter the sub-menu and the following screen appears:
VGA
LPT & COM I/O Access
HDD & FDD I/O Access
PCI Master
PowerOn by PCI Card
Wake Up On LAN/Ring
RTC Alarm Resume
Date (of Month)
x
Resume Time (hh:mm:ss)
x
IRQs Wake Up Event
IRQs Activity Monitoring
8
The power button functions as a normal power-on/-
off button.
When you press the power button, the computer
enters the suspend/sleep mode, but if the button is
pressed for more than four seconds, the computer
is turned off.
Leaves the computer in the power off state.
Reboots the computer.
Restores the system to the previous status before
power failure or interrupt occurred.
The Power LED remains the same color.
The Power LED changes its color to indicate the
suspend state.
The Power LED blinks to indicate the suspend state.
Wake Up Events
O F F
LPT/COM
ON
O F F
Disabled
Disabled
Disabled
0
0 0 0
ON
Press Enter
3 - 2 6
Item Help
Menu Level 88
Hide quick links:
Advertisement
Table of Contents
