Setup; Setting - Alpine CDE-171R Owner's Manual

3
Turn the Rotary encoder to change the setting, and then
press ENTER.
After the setting, the display will return to the current source
automatically.
 Setting item:
TUNER mode:
*1
 VOL LV ADJ
TUNER SET
DISC mode:
*4 *2
 VOL LV ADJ
CD SET
USB mode:
*2
 DIMMER
VOL LV ADJ
iPod mode (CDE-171R/CDE-171RR/CDE-171RM):
*5
 iPod SET
APP DIRECT
AUX mode:
*7
 VOL LV ADJ
AUX SET
The setting items are the same as TUNER setting in SETUP
mode. For details, refer to "SETUP" on page 19.
You can individually emphasize or weaken the volume level
of the current source to create your own tonal preference. The
setting values in Option mode and in SETUP mode are
linkage. Refer to "Setting the Source Volume Level" on
page 16.
Refer to "Dimmer Control" on page 20.
PLAY MODE can be selected in this mode. For details, refer
to "Playing MP3/WMA/AAC Data (PLAY MODE)" on
page 20.
Refer to "Setting the iPod Control" on page 23.
The setting items are the same as iPod setting in SETUP
mode. For details, refer to "iPod/iPhone Setting" on page 21.
AUX NAME can be selected in this mode. For details, refer to
"Setting the AUX NAME mode" on page 20.
*2 *3
 DIMMER
*3
 DIMMER
*3
*6 *2 *3
 VOL LV ADJ  DIMMER
*2 *3
 DIMMER

SETUP

Rotary encoder
/ENTER
FAV
AUDIO/SETUP

Setting

You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press ENTER.
(e.g. Select GENERAL)
*1
 GENERAL  DISPLAY  TUNER  iPod
AUDIO
GENERAL:
FAV SETUP  MENU LANG  AUX SETUP  AUX NAME
PLAY MODE  DEMO
DISPLAY:
DIMMER  TEXTSCROLL
TUNER:
*4 *5
 REGIONAL  PI SEEK
AF
iPod:
iPod LIST
Refer to "Audio Setup" on page 15.
CDE-171R/CDE-171RR/CDE-171RM only.
Displayed only when AUX SETUP is set to ON.
Refer to "Turning AF (Alternative Frequencies) ON/OFF" on
page 10.
Refer to "Receiving RDS Regional (Local) Stations" on page 10.
Refer to "PI SEEK Setting" on page 10.
3
Turn the Rotary encoder to select a setting item, and then
press ENTER.
(e.g. Select AUX SETUP)
4
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select AUX ON or AUX OFF.)
5
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
• Press r to return to the previous mode.
*2
*3

*6
19
-EN