Table of Contents
Advertisement
PRESET DEFINITION MODULE
21 - CREATE PRESET
You must first number and name a Preset, as provided by this function, before assigning
Voices to it.
1. With the module active, key in 21. The display says:
Create & Select
New Preset __
Specify the Preset number with the keypad. The ENTER LED will flash. If the display
confirms your choice, press ENTER.
2. If the selected Preset number already exists, the display will say "Selected Preset Exists"
and asks you to try again.
Enter a number that is not already assigned to a Preset. (Or, exit this function, erase the
Preset as per PRESET DEFINITION 15, and return to this function starting with step 1.)
The display will now say:
Create & Select
Just a Moment
and a new Preset is born.
3. The display then shows:
PXX NULLPRESET
Rename? Y/N
...where XX is the Preset number you specified, and NULL PRESET is the default Preset
name. If you don't want to rename, press NO. To rename, press YES. Slider B positions
the cursor under the letter you want to change, while Slider A chooses between lower
case letters, capital letters, numerals 0 - 9, IF, and space (top slider position). Position
the cursor and enter letters until the name is complete. To exit to another function, see
GENERAL INSTRUCTIONS 3.
© 1985, 1986, 1987 E-mu Systems, Inc.
Page 114
Advertisement
Table of Contents
