Starting Circuit Operation - Yamaha YFM660FS Grizzly 4x4 Supplementary Service Manual

ELECTRIC STARTING SYSTEM

STARTING CIRCUIT OPERATION

The starting circuit on this model consists of
the starter motor, starter relay, rear brake
switch, rear brake switch CDI unit and gear
position switch. If the main switch is on and the
engine stop switch is in the RUN position, the
starter motor can be operated only if:
The transmission is in neutral (the neutral
G
switch is closed).
The transmission is in park (the rear brake
G
switch is closed).
The rear brake lever is pulled (the rear
G
brake switch is closed).
Main fuse
Battery
Starter relay
Starter motor
Start switch
Ignition fuse
Engine stop switch
CDI unit
Rear brake switch
Gear position switch
È TO MAIN SWITCH
É FROM MAIN SWITCH
9 - 16
– +
ELEC
or