Installing The Front Arms And Front Shock Absorber - Yamaha YFM660FS Grizzly 4x4 Supplementary Service Manual

FRONT ARMS AND FRONT SHOCK ABSORBER
INSTALLING THE FRONT ARMS AND
FRONT SHOCK ABSORBER
1.Install:
Front arms
G
Front shock absorber
G
*****************************************************
Installation steps:
G
Install the front arm (upper)
(lower) .
NOTE:
Lubricate the bolts
G
grease.
Be sure to position the bolts
G
bolt head faces outward.
Temporarily tighten the nuts
G
G
Install the front shock absorber
Nut :
45 Nm (4.5 m • kg, 32 ft • lb)
G
Install the ball joints.
Nut :
25 Nm (2.5 m • kg, 18 ft • lb)
Nut :
48 Nm (4.8 m • kg, 35 ft • lb)
G
Install the new cotter pins.
G
Tighten the nuts
NOTE:
Before tightening the nuts
a to 324 mm (12.8 in).
Nut :
45 Nm (4.5 m • kg, 32 ft • lb)
*****************************************************
8 - 49
CHAS
and front arm
with lithium soap base
so that the
.
.
.
, adjust the length