Installing The Ac Magneto - Yamaha YFM660FS Grizzly 4x4 Supplementary Service Manual

RECOIL STARTER AND AC MAGNETO
2.Install:
Starter spring 1
G
Sheave drum assembly 2
G
NOTE:
Mesh the spring hook 3 with the case slit,
G
then wind the spring clockwise into the case
from the larger to smaller diameter.
Mesh the sheave drum hook 4 with the
G
spring hook 5.
3.Install:
Spring 1
G
Friction plate 2
G
Nut
G
NOTE:
Insert the spring hooks into the pawl side
holes.
4.Turn the sheave drum 3-turn clockwise to
give preload to the spring.
5.Install:
Starter handle 1
G
Cap 2
G
NOTE:
Pass the rope through the case hole and
G
make a knot 3 on the rope so that the rope
is not pulled into the case.
Untie the knot 3 after making a knot 4
G
above the handle.

INSTALLING THE AC MAGNETO

1.Apply:
Sealant (Quick Gasket
G
(into the slit)
Sealant (Quick Gasket
P/N. ACC-11001-05-01
Yamaha bond No. 1215:
P/N. 90890-85505
4 - 44
ENG
® ) 1
®
):