Table of Contents
Advertisement
Warning: Please power off the router and remove the external power
adapter before removing or inserting the USIM card, if not, the router
or USIM card may be damaged.
2. Connect the telephone to the PHONE interface using phone cable
(RJ11).
3. Connect your computer to the LAN interface using the Ethernet
cable (RJ45).
Note: The router will adapt the Ethernet cable style (crossover or
straight) automatically.
4. Connect the external power adaptor to a standard power outlet.
Insert the plug into the socket at the rear of the router.
5. Turn the power switch
on to get started. Make sure that the
phone is on hook before power on.
Note: Do not put anything on the top of router. Do not lay routers to
overlap each other when using.
6. Wait 1~2 minutes after turning the router on before you use the
service. The RSSI & PWR indicator should be lit on.
Note: When the router is turned off, an incoming caller will hear the
prompt like "The number you have dialed is currently unavailable.''
If the RSSI (Radio Signal Strength Indicator) LED is blinking constantly
then try moving the router to another location. The router takes 1~2
minutes to initialize, attach to the network and obtain an IP address.
2.4 Power Supply
For normal operation connect the router to the external power supply.
14
Advertisement
Table of Contents
