Table of Contents
Advertisement
4 Internet Access
The router does not require any drivers, and it supports all operating
systems with Ethernet LAN capability, such as Windows 2000, XP,
Vista, MAC OS X and Linux. The router supports two computers surfing
on internet using Ethernet cable at the same time, and also supports
Wireless LAN connection.
Note: All the parameter settings in this chapter are just for your reference.
Please contact your service provider for detail.
4.1 Preparation
Before using the data service, make sure:
The (U)SIM card is installed.
The Ethernet cable is connected properly.
The PWR light is on.
The RSSI light is on.
The PPP light is on.
Web browser requirement:
It is suggested that you use one of these web browsers to connect to
the internet.
IE 6.0 or above
Firefox 2.0
Netscape version 9.0
4.2 Settings
Do not change any settings unless instructed by your service provider.
To make changes to your settings you need to disconnect the router
from the network. After making changes reboot your router by turn off
and on again.
4.2.1 Login
The router can be connected by RJ45 or by Wi-Fi (the SSID is "ZTE Wireless
Network"). By either connection mode, you should set to obtain an IP ad-
dress automatically in the attribution setting of Internet protocol(TCP/IP).
After your computer gets the IP address (like 192.168.0.101) from the
router, open a web browser and type " http://192.168.0.1" in the ad-
dress bar, and then input the username and password.
Internet Access
17
Hide quick links:
Advertisement
Table of Contents
