Zte MF612 User Manual page 31

valid or empty.
Shared: The WLAN clients who have the same WEP key with wireless
gateway can pass the authentication and access the wireless network.
WEPAUTO: Select WEP security automatically.
WPA-PSK: WPA Pre-Shared Key, Enter the Pre-Shared key as a plain
text (ASCII) pass-phrase of at least 8 characters.
WPA2-PSK:It is the securer version of WPA with implementation of
the 802.11i standard.
WPA-PSK/WPA2-PSK:Apply both the WPA-PSK and WPA2-PSK scheme.
If the Authentication type is Open, Shared, WEPAUTO, the bottom
part of the configuration page displays parameters as shown.
WEP Keys: At most four keys can be set in the blank. Choose the
primary key index. The primary key is the only key in use at a given
time. Whatever keys you enter for an access point, you must also
enter the same keys for the client adapter in the same order. In other
words, WEP key 1 on the AP must match WEP key 1 on the client
adapter, WEP key 2 on the AP must match WEP key 2 on the client
adapter, etc. A WEP is either 10 or 26 hexadecimal digits (0~9,a~f and
A~F)based on whether you select 64 bits 128 bits in the Encryption
Strength drop-down list.
If the Authentication type is WPA-PSK , WPA2-PSK or WPA-PSK/WPA2-
PSK , the bottom part of the configuration page displays WPA parameters.
WPA Algorithm: TKIP, AES or AUTO.
Pass phrase: You can input hexadecimal digits up to 64 characters
or input ASCII characters choose a length of 63 characters or less.
Key Renewal Interval: Define how long the key should be renew.
You can set Wireless MAC Filtering:
Wireless Disable: If disabled, MAC address is not used to control
network access.
Wireless Allow: Set the MAC address that is allowed to access
network.
Wireless Reject: Set the MAC address that is not allowed to ac-
cess network.
Click Apply to confirm your configuration.
Internet Access
31