Setting Up Digital Audio; Navigating The Player's Setup Menus - Gateway Connected DVD Player User Manual

Setting up digital audio

The Digital menu lets you set the signal format for the coaxial and optical digital audio
jacks. For example, if you connected the player to an external amplifier that has a Dolby
Digital decoder, you should set the Dolby Digital settings to Bitstream (to let your
amplifier's Dolby Digital decoder work with the player's audio signal).

Navigating the player's setup menus

To navigate the player's setup menus, press the following buttons on your remote control:
Remote Button
STOP
SETUP
down arrows)
right arrows)
ENTER
Tips & Tricks
24
Function
Press before pressing SETUP.
Press to open and close the Welcome to Setup screen.
(up and Press to highlight options within menus.
(left and Press to change option settings within menus.
Press to activate the current selection.
Unless specified otherwise, all buttons mentioned in the following
procedures are buttons on the remote control.
www.gateway.com