Installing Batteries Into The Remote Control; Installing The Network Card - Gateway Connected DVD Player User Manual

Installing batteries into the remote control

To install the batteries:
1
Turn the remote control over, then remove the battery cover.
2
Insert two AAA batteries into the battery bay. Make sure that the batteries are oriented
according to the diagram inside the battery bay.
3
Replace the battery cover.

Installing the network card

Do not plug in the player's power cord or press the POWER button on the front until you
have installed the network card.
To install the network card:
1
Make sure that the player is turned off.
2
Insert your wireless network PC Card into the
player. Make sure that the network card is pressed all the way in.
Network card slot
Important Do not remove the card while the player is turned on. If you remove
the card while the player is on, all playback of networked media will
stop.
www.gateway.com
slot in the back of the
NETWORK CARD
21