Wired Ethernet Setup - Gateway Connected DVD Player User Manual

12
On the player, highlight
is complete.
13
Press
SETUP
14
Go to "Customizing" on page 45
settings.

Wired Ethernet setup

To configure the player for a wired Ethernet network:
1
Make sure that your computer is on and Media Server is running. The Media Server
icon in the Windows taskbar shows that the program is running.
If the Media Server icon has a red "x" on it, Media Server is running but cannot
connect to the network. See
2
On the player's remote control, press
screen opens on the TV.
3
Use your remote control's arrow buttons to highlight
message "Loading network settings" appears, and the player automatically connects
to the wired Ethernet network. If multiple networks are available, highlight the
setting, then press
Network
The IP address appears in the lower-right corner of the screen. To change the way the
IP address is selected, see
name (as it appears to other players), see
4
Highlight
5
Press
SETUP
6
Go to "Customizing" on page 45
settings.
, then press
OK
to close the Welcome to Setup screen.
"Network troubleshooting" on page
ENTER
"Setting the IP address" on page
, then press
OK ENTER
to close the Welcome to Setup screen.
www.gateway.com
on the remote control. Network setup
ENTER
for instructions on customizing your player's other
, then press
STOP
again to select the correct network from the list.
"Changing the player name" on page
. Network setup is complete.
for instructions on customizing your player's other
83.
. The Welcome to Setup
SETUP
, then press
Network
42. To change the player
. The
ENTER
43.
41