Configuring Dolby Digital - Gateway Connected DVD Player User Manual

Configuring Dolby Digital

This setting configures the format of Dolby Digital 5.1 output signals.
To set your Dolby Digital preferences:
1
On the player's remote control, press
screen opens.
2
Use your remote control's arrow buttons to highlight
Digital audio setup menu opens.
3
Highlight
■ Bitstream
Outputs raw 5.1-channel digital signals from the optical or coaxial digital audio
jacks. Use this setting when the player is connected to an external amplifier with
a Dolby Digital decoder.
■
Off
Turns off Dolby Digital output.
■ PCM
Outputs 2-channel digital audio from the optical or coaxial digital audio jacks.
4
Highlight
, then press the
Dolby
, then press
OK ENTER
www.gateway.com
, then press
STOP
buttons to select:
.
. The Welcome to Setup
SETUP
, then press
Digital ENTER
. The
25