Whirlpool 4322525 Manual page 48

BAKE ELEMENT
BAKE
ELEMENT
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before ser-
vicing unit.
Failure to do so could result in electrical
shock or other personal injury.
Test Procedure
Refer to page 4-10 for the location of the
element and the procedure for servicing it.
To test the bake element, perform the follow-
ing steps:
1. Use an ohmmeter and set the range switch
to R x 1.
2. With no power applied, disconnect one
wire from the element terminals. You
should obtain a reading of between 19 Ω
and 28 Ω.
If the reading is not within the range shown,
the element is defective, and should be re-
placed.
BROIL ELEMENT
WARNING
Electrical Shock Hazard
Disconnect from electrical supply before ser-
vicing unit.
Failure to do so could result in electrical
shock or other personal injury.
Test Procedure
Refer to page 4-10 for the location of the
element and the procedure for servicing it.
To test the broil element, perform the follow-
ing steps:
1. Use an ohmmeter and set the range switch
to R x 1.
2. With no power applied, disconnect one
wire from the element terminals. You
should obtain a reading of between 17 Ω
and 26 Ω.
If the reading is not within the range shown,
the element is defective, and should be re-
placed.
5-4
Broil
Element
Terminals