Whirlpool 4322525 Manual page 10

If connecting to a four wire electrical sys-
tem, do not connect the cabinet-ground
conductor to the white (neutral) junction
box wire (see Figure 2-2).
1. Disconnect the power supply.
2. Separate the green, (or bare), and the
white appliance cable wires.
3. Connect the white range cable wire to the
white (neutral) wire in the junction box.
4. Connect the two black wires together with
a twist-on connector.
5. Connect the two red wires together with a
twist-on connector.
6. Connect the green range wire to the green
ground wire in the junction box.
7. Replace the junction box cover.
Where local codes permit connecting the
cabinet-ground conductor to the white
(neutral) junction box wire (Figure 2-1):
1. Disconnect the power supply.
2. Remove the junction box cover.
3. Connect the green and white range cable
wires and the white (neutral) wire in the
junction box together with a twist-on con-
nector.
4. Connect the two black wires together with
a twist-on connector.
5. Connect the two red wires together with a
twist-on connector.
6. Replace the junction box cover.
cable from
junction power supply
box
red
wires
white
wire
bare or green
wire
cable from
Figure 2-1
black
wires
U.L.-listed
conduit
range
connector
Where local codes do not permit connect-
ing the cabinet-ground conductor to the
white (neutral) junction box wire (Figure
2-2):
1. Disconnect the power supply.
2. Separate the green and white appliance
cable wires.
3. Connect the white range cable wire to the
white (neutral) wire in the junction box with
a twist-on connector.
4. Connect the two black wires together with
a twist-on connector.
5. Connect the two red wires together with a
twist-on connector.
6. Connect the green or bare ground wire
from the range cable to a ground wire in
the junction box.
7. Replace the junction box cover.
junction
box
red
wires
bare or green
wires
2-2
cable from
power supply
white
wires
black
wires
U.L.-listed
conduit
cable from
connector
range
Figure 2-2