Replacing A Front Turn Signal Light Bulb - Yamaha Majesty YP400Z Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a front turn signal
light bulb
1. Place the scooter on the center-
1 stand.
2. Remove panel A. (See page 7-8.)
3. Remove the windshield by remov-
2
ing the screws.
3
1
4
5
6
1. Screw
7
2. Windshield
4. Remove the front turn signal light
8
unit by removing the screws.
9
EAU36124
1
2
1. Screw
2. Front turn signal light unit
5. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1
1. Turn signal light bulb socket
6. Remove the burnt-out bulb by
pushing it in and turning it counter-
7-35
clockwise.
7. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
8. Install the socket (together with the
bulb) by turning it clockwise.
9. Place the turn signal light unit in
the original position, and then in-
2
stall the screws.
10. Install the windshield by installing
the screws.
11. Install panel A.