Getting Started; Setting The Time, Date, And Beeper; How To Set The Time, Date, And Beeper - BD Logic Owner's Manual

Getting Started

Setting the Time,
Date, and Beeper
Having the correct time and date of each blood glucose test result and
insulin dose helps you and your healthcare professional track changes
in your therapy. It is important to set the correct time and date so you
have records of when you test and inject. If you do not set the time
and date, all blood glucose monitoring results and insulin doses will
be marked and will not be included in averages (refer to page 36).
Your BD Logic TM Blood Glucose Monitor offers a beeper function that
is preset to " ." This tells you when enough blood is applied to the
test strip, when a test is completed, and prompts you through other
steps in using your monitor.
NOTE: Remember to adjust time and date settings as needed to
match the local time or daylight savings time and after you replace
the battery.
8 • Getting Started

HOW TO SET THE TIME, DATE, AND BEEPER

Monitor is off, with no test strip inserted in the test strip slot.
1. Begin Setup:
Press and continue to hold the
Mode button until you hear a short
beep and see the flashing hour displayed.
Release the Mode button.
2. Set Hour:
Press the right or left
button until the correct hour (with
or ) appears.
PM
3. Press the Mode button briefly to
confirm your choice and to advance to
set the minutes.
4. Set Minutes:
Press the right or left
button until the correct minutes appear.
5. Press the Mode button briefly to
confirm your choice and to advance to
set the year.
(Continued on next page.)
Flashing Hour
Display
arrow
AM
Set Hour
(Example)
arrow
Set Minutes
(Example)
Getting Started • 9
AM
PM
PM