Marking An Insulin Dose - BD Logic Owner's Manual

4. To save the marked test result, press the
Mode button.
NOTE: Once a marked test result or insulin dose is saved, you
cannot unmark. Marked tests are not included in averages.
5. The marked test result is stored in the
monitor's memory.
6. To turn off the monitor, press and hold
the Mode button until the monitor
turns off, OR the monitor will turn off
automatically after 1 minute.
Marking an
Insulin Dose
An insulin dose can be marked after the injection is recorded. For an
explanation of situations in which you may wish to mark an insulin
dose, refer to page 37.
1. Record your insulin dose. (Refer to page
43 for how to record your insulin doses.)
46 • How to Use Your Monitor's Optional Memory Functions
2. After you press the Mode
briefly or press the Insulin Recording
button, a long beep sounds to confirm
that the insulin dose was saved.
3. To mark your insulin dose, press the
right or left arrow button.
An asterisk ( * ) appears, to confirm
that the dose is marked. Marking
is complete.
4. To turn off the monitor, press and hold
the Mode button until the monitor
turns off, OR the monitor will turn off
automatically after 1 minute.
How to Use Your Monitor's Optional Memory Functions • 47
button
U
Marked
Insulin Dose
(Example)