Inserting The Bd™ Test Strip - BD Logic Owner's Manual

3. Insert a BD Ultra-Fine TM 33 Lancet into
the lancet holder.
4. Remove the lancet cover while holding
the base of the lancet.
5. Screw the cap back onto the lancet
device.
6. Pull out the arming knob as far as it will
go and then release it. The lancet device is
now armed.
22 • How to Test Your Blood Glucose
Inserting the BD™ Test Strip
Monitor is off, with no test strip inserted in the test strip slot.
Insert Lancet
Remove Lancet
Cover
2. Match the code number on the display
Screw Cap Back On
3. A blinking blood drop
Arm Lancet Device
NOTE: Use only BD Test Strips when testing.
(Continued on next page.)
1. Insert a BD™ Test Strip into the test strip
slot. The monitor turns on and briefly
displays "All Segments."
Edge to Apply End to Insert
Blood Drop Into Monitor
with the code on the test strip vial. If the
codes do not match, press the right
or left arrow button to match the code
printed on the test strip vial. When the codes
match, press the Mode button briefly
(refer to page 12 for "Coding Your
Monitor").
tells you that the
monitor is ready for the next step.
Insert Test Strip
Match Codes
(Example)
Blinking Blood
Drop
How to Test Your Blood Glucose • 23