How To Run A Control Solution Test - BD Logic Owner's Manual

HOW TO RUN A CONTROL SOLUTION TEST

Monitor is off, with no test strip inserted in the test strip slot.
1. Insert a BD™ Test Strip into the test strip
slot. The monitor turns on and displays
the code number.
2. Match the code number on the display
with the code on the test strip vial.
If the codes match, you are ready to
begin testing.
If the codes do not match, review
"Coding Your Monitor" (refer to
page 12).
16 • Getting Started
3. A blinking blood drop
4. Mark as a control solution test by
Insert Test Strip
Match Codes
IMPORTANT:
(Example)
test so the test result does not appear to be one of your blood glucose
test results.
(Continued on next page.)
tells you that
the monitor is ready for the next step.
pressing the right or left
button until a " " appears.
It is important to mark a control solution
Blinking
Blood Drop
arrow
Mark as Control
Solution Test
Getting Started • 17