Labeling Your Insulin Types; Recording Your Insulin Doses - BD Logic Owner's Manual

Labeling Your
Insulin Types
The labels P1, P2, P3, and P4 are used by your monitor to identify up to
4 different types of insulin. You decide what label to use for each type
of insulin you take. Keep a record of the labels you have chosen for each
insulin type.
The chart below shows examples of labeling
up to 4 different types of insulin.
Example 1: Example 2:
Uses 1 insulin Uses 2 insulin
type only types
NPH NPH
P1 __________ P1 __________
Humalog *
P2 __________ P2 __________
*
P3 __________ P3 __________
P4 __________ P4 __________
A blank chart like this can be found in the back of your logbook.
You can use it to record what labels you are using for your insulin types.
Humalog is a trademark of Eli Lilly and Company.
*
42 • How to Use Your Monitor's Optional Memory Functions
Example 3: Example 4:
Uses 3 insulin Uses 4 insulin
types types
NPH NPH
P1 __________ P1 __________
Humalog * Humalog *
P2 __________ P2 __________
P3 __________ Regular P3 __________ Regular
P4 __________ P4 __________
30/70
Recording Your
Insulin Doses
NOTE: The monitor will not enter into insulin recording mode if:
• The test strip is in the test strip slot, or
• The Insulin Recording function has not been turned on in the Optional
Memory function Setup. (Refer to page 38 for setup.)
Monitor is off, with no test strip inserted in the test strip slot.
1. Inject your insulin.
2. After you inject your insulin, press and
release the Insulin Recording
The monitor turns on and advances
to insulin recording. The
a flashing "1" appear on the display.
3. Press the left or right
button to select the label (P1, P2, P3, or P4)
that matches the type of insulin you injected.
(Refer to page 42 for labeling your
insulin.)
4. Press the Mode button briefly to
confirm your choice and to advance to
record your insulin dose.
(Continued on next page.)
How to Use Your Monitor's Optional Memory Functions • 43
button.
and
Insulin
Recording
arrow
Select Insulin
Type