BD Logic Owner's Manual page 10

6. Set Year:
Press the right or left
button until the correct year appears.
7. Press the Mode button briefly to
confirm your choice and to advance
to set the month.
8. Set Month:
Press the right or left
button until the correct month appears.
9. Press the Mode button briefly to
confirm your choice and to advance
to set the day.
10. Set Day:
Press the right or left
button until the correct day appears.
11. Press the Mode button briefly to
confirm your choice and to advance to
set the beeper. A long beep will sound.
10 • Getting Started
arrow
Set Year
(Example)
arrow
Set Month
(Example)
arrow
Set Day
(Example)
12. Set Beeper:
Beeper is preset to " ." Press the
right or left arrow button to
select the beeper setting (ON or OFF).
Instructions in this guide assume the beeper is set to
NOTE:
" ." If you have set the beeper to "
beep as described throughout the guide.
13. Press the Mode button briefly to
confirm your choice and to advance
to the end of setup.
14. End Setup:
The display shows your set time
and date. Setup is complete.
15. Return to Setup:
Press the Mode button briefly to
return to start of setup. The flashing
hour that you set is displayed.
16. Turn Off Monitor:
Press and hold the Mode
until the monitor turns off, OR the
monitor will turn off automatically after
1 minute.
Set Beeper
(Example)
, " you will not hear the
End of Setup
(Example)
button
Getting Started • 11
PM