Advertisement
19
Loosen 2 screws and remove one
screw. Keep removed screw for
later use.
22
Lossen 2 screws and remove one
screw. Keep removed screw for later
use.
For fan without
light kit, go to
step 25.
For fan with
light kit go to
step 26
27
Attach the glass by locating dimples
in light fixture with groves in the
glass and twist clockwise until tight.
20
Align keyslot holes of light kit
plate and twist it to lock clock-
wise. Install the screw removed
in step 19 and tighten all screws
securely.
23
25
Attach blanking plate by locating
dimples in light fixture with grooves
in the blanking plate and twist clock-
wise.
21
Connect the plug from fan to the
plug from light kit plate.
24
Align keyslot holes of light kit plate
and twist it to lock clockwise. Install
screw removed in step 22 and tighten
all screws securely.
26
Install 75 watt halogen bulb. Bulb
included. Do not touch bulb surface
as oily residue from skin can cause
the bulb to explode. WaRnInG:
Over lamping the fan will result in the
fan lights shutting down until the
proper wattage bulbs are installed.
Reset lights by turning off the wall
switch, breaker, or by remote.
Replace with correct wattage bulbs,
turn the power on.
Advertisement
