Advertisement
Quick Links
Owner's Guide and Installation Manual
Shown with 52" blades
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
Shown with 66"
blades
3LRRXXD Series Fan
UL Model No. : 3LRR66/52
RETAILER NAME:
Energy Star approved with
52" blades
10.6 kgs
23.4 lbs
Total fan weight with light kit
Advertisement
Related Manuals for Monte Carlo Fan Company 3LRR66
Summary of Contents for Monte Carlo Fan Company 3LRR66
- Page 1 Energy Star approved with 52” blades 3LRRXXD Series Fan Shown with 52” blades UL Model No. : 3LRR66/52 Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME: DATE OF PURCHASE: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 10.6 kgs...
- Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Cutomer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2011 Monte Carlo Fan Company 2/9/2012...
- Page 3 Align the hole in the cable through the downrod. downrod with the hole in the yoke. Insert cotter pin through yoke and downrod until point appears on the other side © 2011 Monte Carlo Fan Company 2/9/2012...
-
Page 4: Mounting Bracket
Make sure that when the safety cable is from remote marked AC L. Connect all green fully extended the leadwires are longer than the ground wires to Grounded wire from House. cable and no stress is placed on the leadwires. © 2011 Monte Carlo Fan Company 2/9/2012... - Page 5 Attach cover of remote by placing over 4 pins 23A all 12V.Attach cover of remote by placing Install wall control unit to outlet box and snapping into place. over buttons and snap the battery cover in place. using machine screws provided. © 2011 Monte Carlo Fan Company 2/9/2012...
- Page 6 USING SBCFL WILL OVERHEAT THE UNIT light fixture with groves in the glass AND CAUSE DAMAGE TO THE UNIT OR THE and twist clockwise until tight. FAN WHICH THE UNIT IS INSTALLED TO- GETHER. © 2011 Monte Carlo Fan Company 2/9/2012...
- Page 7 Depress rev button allow a few seconds for remote to change rotation direction with fan running. WARNING: This fixture is not dimmable. Use only with on/off switch. Do not use in conjunction fan/light remote controls or light dimmers. © 2011 Monte Carlo Fan Company 2/9/2012...
-
Page 8: User Servicing Instructions
(Fuse is inside the canopy on the blue wire to remote receiver, push and twist the cap to open the fuse case) Push and twist to reassemble fuse. Risk of fire. Replace fuse only with 3 amp, 125 volt fuse. © 2011 Monte Carlo Fan Company 2/9/2012... - Page 9 Jan.27.10 revise - Add ES logo, ES approved with 52” blades Feb.2012 New format...
Need help?
Do you have a question about the 3LRR66 and is the answer not in the manual?
Questions and answers