Summary of Contents for Monte Carlo Fan Company 3LR38 Series
Page 1
Owner’s UL Model No. : 3LR38/22 Manual Ceiling Fan Installation Instructions Shown With 38” blades For 3LR38/22XXd Series Fan Read and Save TheSe InSTRucTIonS Total fan weight with lights...
Installation aFeTy WaRnInG: To Reduce The RISK oF FIRe, eLecTRIc ShocK, oR InJuRy To peRSonS, oBSeRve The FoLLoWInG: Read and Save TheSe InSTRucTIonS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70-1999), including fire-rated construction.
Page 3
Insert downrod into the yoke on top Place yoke cover over downrod. Thread the leadwires and safety of fan body. Align the hole in the cable through the downrod. downrod with the hole in the yoke. Insert cotter pin through yoke and downrod until point appears on the other side Install keeper pin.
Page 4
Align keyslot holes of light kit Loosen 2 screws and remove one Connect the plug from fan to the plate and twist it to lock clock- screw. Keep removed screw for plug from light kit plate. wise. Install the screw removed later use.
ROUBLE HOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart.