Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
3VER56XXD Series Fan
RETAILER NAME:
RETAILER ADDRESS:
UL Model NO. : AC-552
11.6 kgs
25.52 lbs
Total fan weight with light kit
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Monte Carlo Fan Company 3VER56XXD Series
Summary of Contents for Monte Carlo Fan Company 3VER56XXD Series
- Page 1 Owner’s Guide and Installation Manual 3VER56XXD Series Fan UL Model NO. : AC-552 Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 11.6 kgs...
-
Page 2: Cautions And Warnings
All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Cutomer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2011 Monte Carlo Fan Company 3/5/2012... - Page 3 Re-tighten downrod set loosen downrod set screws. assembly through downrod. screws on motor housing yoke. Place yoke cover to motor assembly by inserting the alignment post on yoke cover into the hole on top housing. © 2011 Monte Carlo Fan Company 3/5/2012...
- Page 4 House. Make sure that no filaments are by aligning its notches with the outside of the wirenuts. Insert the remote receiver into mounting preassembled canopy mounting screws bracket. on mounting bracket and twist clockwise until tight. © 2011 Monte Carlo Fan Company 3/5/2012...
- Page 5 SO COULD CAUSE THE UNIT TO clockwise till tight. Reinstall the screw OVERHEAT AND LEAD TO POSSIBLE removed in step 16. Tighten all screws DAMAGE TO THE PRODUCT. securely. © 2011 Monte Carlo Fan Company 3/5/2012...
- Page 6 WALL MOUNT INSTALL Install wall control unit to outlet box using Attach front cover to wall control unit with machine screws provised. screws provided. Snap battery cover in place © 2011 Monte Carlo Fan Company 3/5/2012...
- Page 7 FORWARD/REVERSE: Depress reverse button with fan running. Allow a few seconds for fan to slow down and change rotation direction. Clicking noise may be heard after depressing button. WARNING: This fixture is not dimmable. Use only with on/off switch. Do not use in conjunction fan/light remote controls or light dimmers. © 2011 Monte Carlo Fan Company 3/5/2012...
-
Page 8: Troubleshooting
Trouble Shooting Warning Trouble Suggested Remedy CAUTION CAUTION CAUTION WARNING: © 2011 Monte Carlo Fan Company 3/5/2012... - Page 9 Mar.2012...
Need help?
Do you have a question about the 3VER56XXD Series and is the answer not in the manual?
Questions and answers