▄ Setting A↔B Repeat
Section Repeat Starting Point
To repeatedly play music/voice files, press the REC button
shortly at the point where the section starts.
■
will appear on the LCD window.
MUSIC001.mp3
Section Repeat Ending Point
Press the REC button again at the point where the section
ends. The set section will now play repeatedly.
■
will appear on the LCD window.
MUSIC001.mp3
Note
● To cancel Section Repeat, press the REC button shortly
once again.
● The Pause function can be used during Section Repeat.
26
26
00:01:15
00:02:15
▄ Listening to FM
The earphones work as an antenna, so please connect them
before using. First see page 22, then switch to Radio mode
Manually Searching the Frequency (Scan mode)
If you press the
◄ ◄
/
► ►
button, you can change to the
▐
▌
desired frequency.
Automatically Searching the Frequency (Scan mode)
After holding down the
◄ ◄
/
► ►
▐
your hand it stops at the next frequency.
Note
● The frequency movement unit is different depending on the
menu settings FM Radio ↔ Seek Step. (See page 38)
Saving Channels
While listening to the FM radio, if you press the M [Menu]
button, the Save Channel screen appears.
■ The popup menu appears.
Select the desired channel number using the +/-
button, and then press the M [Menu] button to save the
frequency.
Scan
STEREO
Note
● Channels can also be saved in the FM Radio menu.
(See page 36.)
● A saved radio channel cannot be deleted; but you can save
a new channel over a channel that has already been saved.
(Please see page 28 on [Changing a saved frequency].)
● You can save up to 20 channels.
button, when you take off
▌
Scan
CH01 : 105.50
STEREO
CH02 :
CH03 :
27