Tenda W541R User Manual page 42

Wireless Broadband Router User's Guide
1. Enable URL Filter Function
2. Filter Mode: Two filter modes,
"Filter" and "Allow", are available.
When you select "Filter", you are able to
forbid the computer with the IP address
visiting the URL with the contents
stated. When you select "Allow", you
are allowing the computer with the IP
address to have access to the URL with
the contents stated only.
3. IP: Input the IP of the computer in
LAN to be managed, or you can also
input a range of IP addresses.
4. URL String: Input full or part of the
domain name.
5. Enable: To enable the selected URL
filter rules.
6. Save: To save your settings.
For Example: If you require forbid the
computers in LAN with IP Address of
from 192.168.0.10 to 192.168.0.100
from having access to the websites with
the domain of "sex", or part of its
domain name with words of "sex", you
could set as the figure beside.
Note: You should restart your client
utility, or run "net stop dnscache" in its
MS-DOS window to make the setting go
into effect due to the DNS cache
function of Windows.
39