Tenda W541R User Manual page 34

1. DHCP Server: The DHCP function
will go into effect if you select "Enable"
as the figure beside.
2. IP Pool Starting Address: The starting
IP address which
automatically starts.
3. IP Pool Ending Address: The ending
IP address which
automatically ends.
The IP address that DHCP Server assigns
to the requested client should be within
the IP Pool. e.g., when you configure IP
address pool from 20 to 30, the IP
Address which can be obtained by the
clients would be between 20 and 30.
4. Lease Time: You can set the time
period during which the DHCP allows
the assigned IP addresses to be used by
the clients.
By setting a suitable lease time, you
would enable the DHCP to take better
advantage of the IP addresses which are
not used again.
For example, you can set the lease time
as one hour, and then the DHCP server
would take back the IP addresses per an
hour.
Wireless Broadband Router User's Guide
DHCP Server
DHCP Server
31