Tenda W541R User Manual page 37

Wireless Broadband Router User's Guide
1. Service Port: The service port which
the router offers to WAN.
2. IP Address: The IP Address of the
computer in the LAN which work as a
virtual server.
3. Enable: Please select "Enable" and
the rules will go into effect.
4. In "Service Port", the common port
numbers are list here. You could select
one of them and then select an ID in
"ID" and then press "Insert", and then
the port would be added to the list
automatically. For the port numbers
which are not displayed here, you could
fill it manually.
For example, the server in the LAN with
IP address of 192.168.0.1 offers WEB
service with port number of 80, in order
to enable visitors in the Internet to have
successful access to this server, you
should configure as the figure beside.
Note: If you configure a virtual server
(server port: 80), you should configure
the remote WEB management in
"Wireless Security Configure" as a
value different from 80. For example,
you could set it as 8080. Otherwise the
confliction would occur and the server
would not be able to function. After you
configure the value in "Wireless
Security Configure", you should reboot
34